Waterwell Aqua Balance 1 1kg — Alkalinity Increaser

Waterwell Aqua Balance 1 is an alkalinity increaser for swimming pool water. It raises Total Alkalinity (TA) and acts as a buffer for pH, helping maintain the balance of your pool water.

Low Total Alkalinity can contribute to corrosive and irritating pool water and may also result in etching and staining of pool surfaces. Maintaining the recommended Total Alkalinity level is therefore an important part of pool water balancing.

Aqua Balance 1 for Pool Alkalinity

Aqua Balance 1 is designed specifically to increase Total Alkalinity in swimming pool water. Total Alkalinity helps buffer pH, making it an important part of maintaining balanced pool water.

Waterwell recommends the following Total Alkalinity ranges:

• Plaster, concrete and tiled pools: 80–125 ppm
• Fibreglass, vinyl and painted pools: 125–150 ppm

These recommended ranges are provided by Waterwell for the different pool surface types.

How to Use Aqua Balance 1

The recommended dosage is 200 g of Aqua Balance 1 per 10,000 litres of pool water. This dosage raises the Total Alkalinity level by approximately 10 ppm.

Add the product directly to the pool water while the pump is operating. Broadcast the product evenly over the entire pool water surface.

Aqua Balance 1 Dosage Guide

Based on the Waterwell dosage of 200 g per 10,000 litres:

• 10,000 L: 200 g
• 20,000 L: 400 g
• 30,000 L: 600 g
• 40,000 L: 800 g
• 50,000 L: 1 kg

The amount required depends on your pool’s water volume and current Total Alkalinity level. Test your pool water before adjusting chemical levels.

Why Maintain Total Alkalinity?

Total Alkalinity is an important part of pool water balance because it acts as a buffer for pH. When alkalinity is too low, Waterwell notes that pool water can become corrosive and irritating, with the potential for etching and staining of pool surfaces.

Maintaining the appropriate Total Alkalinity range helps you manage your pool’s overall water balance.

Product Specifications

Brand: Waterwell
Product: Aqua Balance 1
Product Type: Alkalinity increaser / pool water balancer
Size: 1 kg
Function: Raises Total Alkalinity and acts as a pH buffer
Recommended Dosage: 200 g per 10,000 L raises TA by 10 ppm
Application: Swimming pool water

Check Your Pool Water Before Adding Aqua Balance 1

Test your pool’s Total Alkalinity before adding an alkalinity increaser. The required amount will depend on the pool’s water volume and current TA level. Follow the manufacturer’s recommended dosage and application instructions when using the product.